[Udemy] Программирование сборки ARM GNU с нуля Язык ассемблера (2023)

Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 80- Programming - Implementing the Initialization Function.mp4

502.62 MB

Section 1- Getting Started, Lecture 2- Installing our Integrated Development Environment (IDE).mp4

8.49 MB

Section 1- Getting Started, Lecture 3- Programming - Writing a simple assembly program.mp4

68.24 MB

Section 1- Getting Started, Lecture 4- Programming - Writing a simple assembly program without a startup file.mp4

38.77 MB

Section 2- Introduction to Arm Architecture, Lecture 5- The Computing Device.mp4

31.87 MB

Section 2- Introduction to Arm Architecture, Lecture 6- Number Systems.mp4

53.76 MB

Section 2- Introduction to Arm Architecture, Lecture 7- Translating Bits to Commands.mp4

22.24 MB

Section 2- Introduction to Arm Architecture, Lecture 8- The RISC Design Philosophy.mp4

25.01 MB

Section 2- Introduction to Arm Architecture, Lecture 9- The ARM Design Philosophy.mp4

21.29 MB

Section 2- Introduction to Arm Architecture, Lecture 10- Von Nuemann and Harvard architecture.mp4

30.02 MB

Section 2- Introduction to Arm Architecture, Lecture 11- ARM Cortex-M Registers.mp4

37.45 MB

Section 2- Introduction to Arm Architecture, Lecture 12- ARM Cortex-M Vector Table.mp4

10.49 MB

Section 3- Assembler Rules and Directives, Lecture 13- The ARM,Thumb and Thumb-2 Instruction Sets.mp4

19.86 MB

Section 3- Assembler Rules and Directives, Lecture 14- Predefined Register Names.mp4

14.39 MB

Section 3- Assembler Rules and Directives, Lecture 15- Frequently used Directives.mp4

10.84 MB

Section 3- Assembler Rules and Directives, Lecture 16- Overview of Binary Operators.mp4

11.79 MB

Section 3- Assembler Rules and Directives, Lecture 17- Programming - Renaming Registers.mp4

11.9 MB

Section 3- Assembler Rules and Directives, Lecture 18- Programming - Allocating space in memory with the SPACE Directive.mp4

41.11 MB

Section 3- Assembler Rules and Directives, Lecture 19- Programming - Swapping Register Content.mp4

11.66 MB

Section 3- Assembler Rules and Directives, Lecture 20 - Source.zip

29.14 MB

Section 4- Load-Store Instructions, Lecture 21- Memory Demarcations.mp4

29.47 MB

Section 4- Load-Store Instructions, Lecture 22- Frequently used Load_Store Instructions (Part I).mp4

43.36 MB

Section 4- Load-Store Instructions, Lecture 23- Frequently used Load_Store Instructions (Part II).mp4

34.16 MB

Section 4- Load-Store Instructions, Lecture 24- Notice.docx

12.7 KB

Section 4- Load-Store Instructions, Lecture 25- Frequently used Load_Store Instructions (Part III).mp4

31 MB

Section 4- Load-Store Instructions, Lecture 26- Pre-Indexed Addressing.mp4

15.05 MB

Section 4- Load-Store Instructions, Lecture 27- Post-Indexed Addressing.mp4

15.88 MB

Section 4- Load-Store Instructions, Lecture 28- Endianness.mp4

18.3 MB

Section 4- Load-Store Instructions, Lecture 29- Defining Memory Areas.mp4

16.47 MB

Section 5- Dealing with Constants and Literals, Lecture 30- The Encoding of the MOV Instruction.mp4

47.97 MB

Section 5- Dealing with Constants and Literals, Lecture 31- Loading Constants with the LDR Instruction.mp4

19 MB

Section 5- Dealing with Constants and Literals, Lecture 32- Loading Constants with the MOVW and MOVT Instructions.mp4

6.23 MB

Section 5- Dealing with Constants and Literals, Lecture 33- Loading Labels with ADR, ADRL and LDR Instructions.mp4

16.44 MB

Section 5- Dealing with Constants and Literals, Lecture 34- Programming - Solving a Simple Equation.mp4

17 MB

Section 5- Dealing with Constants and Literals, Lecture 35- Programming - Importing from C to Assembly.mp4

24.04 MB

Section 5- Dealing with Constants and Literals, Lecture 36- Programming - Exporting from Assembly to C.mp4

25.44 MB

Section 6- Arithmetic and Logic Instructions, Lecture 37- Flags.mp4

20.7 MB

Section 6- Arithmetic and Logic Instructions, Lecture 38- The N and V Flags.mp4

29.44 MB

Section 6- Arithmetic and Logic Instructions, Lecture 39- The Z and C Flags.mp4

5.47 MB

Section 6- Arithmetic and Logic Instructions, Lecture 40- Compare_Test Instructions.mp4

44.8 MB

Section 6- Arithmetic and Logic Instructions, Lecture 41- Overview of Boolean Operations.mp4

10.14 MB

Section 6- Arithmetic and Logic Instructions, Lecture 42- Introduction to Shifts and Rotations.mp4

9.43 MB

Section 6- Arithmetic and Logic Instructions, Lecture 43- Understanding Logical Shifts.mp4

40.24 MB

Section 6- Arithmetic and Logic Instructions, Lecture 44- Understanding Rotations.mp4

12.2 MB

Section 6- Arithmetic and Logic Instructions, Lecture 45- Some Shift and Rotate Examples.mp4

20.18 MB

Section 6- Arithmetic and Logic Instructions, Lecture 46- Overview Addition and Subtraction Instructions.mp4

12.7 MB

Section 6- Arithmetic and Logic Instructions, Lecture 47- Overview of Multiplication Instructions.mp4

33.44 MB

Section 6- Arithmetic and Logic Instructions, Lecture 48- Multiplying by Constants.mp4

17.05 MB

Section 6- Arithmetic and Logic Instructions, Lecture 49- Overview of the Division Instruction.mp4

9.08 MB

Section 6- Arithmetic and Logic Instructions, Lecture 50- Bit Manipulation Instructions.mp4

39.07 MB

Section 6- Arithmetic and Logic Instructions, Lecture 51- Programming - Finding the Maximum Value in an Array.mp4

55.18 MB

Section 6- Arithmetic and Logic Instructions, Lecture 52- Programming - Experimenting with the LSL Instruction.mp4

22.1 MB

Section 6- Arithmetic and Logic Instructions, Lecture 53- Programming - Adding Signed Numbers.mp4

32.65 MB

Section 6- Arithmetic and Logic Instructions, Lecture 54- Programming - Finding the Minimum Value in an Array.mp4

32.5 MB

Section 6- Arithmetic and Logic Instructions, Lecture 55- Programming - Solving a More Complex Equation.mp4

26.39 MB

Section 6- Arithmetic and Logic Instructions, Lecture 56- Programming - Performing Division by Subtraction.mp4

29.31 MB

Section 7- Branch and Loop Instructions, Lecture 57- Introduction to Branches and Loops.mp4

6.45 MB

Section 7- Branch and Loop Instructions, Lecture 58- Branching.mp4

76.05 MB

Section 7- Branch and Loop Instructions, Lecture 59- Compare and Branch.mp4

8.87 MB

Section 7- Branch and Loop Instructions, Lecture 60- Loops in Assembly.mp4

26.26 MB

Section 7- Branch and Loop Instructions, Lecture 61- Conditional Execution.mp4

26.5 MB

Section 7- Branch and Loop Instructions, Lecture 62- The IF-THEN Block.mp4

35.54 MB

Section 7- Branch and Loop Instructions, Lecture 63- Programming - Computing the Factorial of a Number using the IF-THEN Block.mp4

20.74 MB

Section 8- Stack Instructions, Lecture 64- Introduction to the Stack.mp4

5.99 MB

Section 8- Stack Instructions, Lecture 65- The LDM and STM Instructions.mp4

30.76 MB

Section 8- Stack Instructions, Lecture 66- Syntax of the PUSH and POP Instructions.mp4

7.04 MB

Section 8- Stack Instructions, Lecture 67- Programming - Pushing and Popping a Stack.mp4

12.88 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 68- Overview of ARM Cortex-M General Purpose Input_Output Module.mp4

34.53 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 69- Getting the right Documentation.mp4

16.86 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 70- Programming - Analyzing the Chip's Memory Map.mp4

101.28 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 71- Programming - Defining Addresses for Registers.mp4

191.8 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 72- Programming - Setting the Pin as an Output Pin.mp4

66.88 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 73- Programming - Toggling a Pin using the Output Data Register (ODR).mp4

48.11 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 74- Programming - Toggling a Pin using the Bit Set _Reset Register (BSRR).mp4

56.07 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 75- Programming - Defining Registers for Input Driver.mp4

59.53 MB

Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 76- Programming - Implementing the Input Driver.mp4

253.5 MB

Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 77- Introduction to Analog to Digital Conversion.mp4

73.22 MB

Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 78- Understanding ADC Independents Modes.mp4

30.98 MB

Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 79- Programming - Planning the Project.mp4

40.88 MB

Section 1- Getting Started, Lecture 1- Downloading our Integrated Development Environment (IDE).mp4

32.44 MB

Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 81- Programming- Implementing the ADC Read Function.mp4

150.92 MB

Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 82- Programming - Testing the ADC Driver.mp4

293.99 MB

Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 83- Overview of the UART Protocol.mp4

93.25 MB

Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 84- Programming - Planning the Project.mp4

85.16 MB

Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 85- Programming - Configuring the GPIO Pins for the UART.mp4

243.99 MB

Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 86- Programming - Configuring the UART Parameters.mp4

107.4 MB

Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 87- Programming - Sending Characters.mp4

192.38 MB

Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 88- Programming - Retargeting Printf_2.mp4

67.41 MB

Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 89- Programming - Developing the UART RX Driver.mp4

284.4 MB

Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 90- Overview of the System Tick Timer.mp4

68.78 MB

Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 91- Programming - Implementing the Initialization Function.mp4

200.56 MB

Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 92- Programming - Implementing the Delay Function.mp4

177.8 MB

Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 93- Programming - Implementing Milliseconds Delay.mp4

49.21 MB

Section 13- Developing the General Purpose Timer Driver, Lecture 94- Overview of General Purpose Timers.mp4

152.82 MB

Section 13- Developing the General Purpose Timer Driver, Lecture 95- Programming - Planning the Project.mp4

51.96 MB

Section 13- Developing the General Purpose Timer Driver, Lecture 96- Programming - Implementing the Initialization Function.mp4

94.75 MB

Section 13- Developing the General Purpose Timer Driver, Lecture 97- Programming - Testing the Driver.mp4

212.49 MB

Section 14- Working with Data Structures, Lecture 98- Introduction to FIFOs.mp4

5.84 MB

Section 14- Working with Data Structures, Lecture 99- Notice.jpg

101.22 KB

Section 14- Working with Data Structures, Lecture 100- [OPTIONAL] Implementing the FIFO in C (Part I).mp4

106.47 MB

Section 14- Working with Data Structures, Lecture 101- [OPTIONAL] Implementing the FIFO in C (Part II).mp4

89.92 MB

Section 14- Working with Data Structures, Lecture 102- Programming - Implementing the Initialization Function.mp4

31.57 MB

Section 14- Working with Data Structures, Lecture 103- Programming - Implementing the FIO Put Function.mp4

61.49 MB

Section 14- Working with Data Structures, Lecture 104- Programming - Implementing the FIO Get Function.mp4

62.54 MB

Section 14- Working with Data Structures, Lecture 105- Programming - Implementing the FIO Size Function.mp4

26.13 MB

Section 14- Working with Data Structures, Lecture 106- Programming - Testing the FIFO.mp4

86.55 MB

Section 15- Working with State Machines, Lecture 107- Introduction to Moore and Mealy FSM.mp4

51.61 MB

Section 15- Working with State Machines, Lecture 108- Designing Traffic Light System using Moore FSM.mp4

197.02 MB

Section 15- Working with State Machines, Lecture 109- Notice.jpg

103.96 KB

Section 15- Working with State Machines, Lecture 110- [OPTIONAL] Implementing a Traffic Light System using Moore FSM (Part I).mp4

480.12 MB

Section 15- Working with State Machines, Lecture 111- [OPTIONAL] Implementing a Traffic Light System using Moore FSM in C (Part II).mp4

189.9 MB

Section 15- Working with State Machines, Lecture 112- [OPTIONAL] Implementing Moore FSM using Pointers.mp4

102.06 MB

Section 15- Working with State Machines, Lecture 113- Programming - Configuring the Required Pins.mp4

86.49 MB

Section 15- Working with State Machines, Lecture 114- Programming - Implementing the State Machine.mp4

495.99 MB

Section 15- Working with State Machines, Lecture 115- Programming - Testing the State Machine.mp4

80.43 MB

Section 15- Working with State Machines, Lecture 116- Remarks.jpg

71.31 KB

Субтитры eng/ Section 1- Getting Started, Lecture 1- Downloading our Integrated Development Environment (IDE).vtt

2.45 KB

Субтитры eng/ Section 1- Getting Started, Lecture 2- Installing our Integrated Development Environment (IDE).vtt

2.4 KB

Субтитры eng/ Section 1- Getting Started, Lecture 3- Programming - Writing a simple assembly program.vtt

22.84 KB

Субтитры eng/ Section 1- Getting Started, Lecture 4- Programming - Writing a simple assembly program without a startup file.vtt

9.44 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 5- The Computing Device.vtt

2.55 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 6- Number Systems.vtt

7.5 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 7- Translating Bits to Commands.vtt

3.55 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 8- The RISC Design Philosophy.vtt

4.37 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 9- The ARM Design Philosophy.vtt

3.49 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 10- Von Nuemann and Harvard architecture.vtt

4.22 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 11- ARM Cortex-M Registers.vtt

5.14 KB

Субтитры eng/ Section 2- Introduction to Arm Architecture, Lecture 12- ARM Cortex-M Vector Table.vtt

1.5 KB

Субтитры eng/ Section 3- Assembler Rules and Directives, Lecture 13- The ARM,Thumb and Thumb-2 Instruction Sets.vtt

2.89 KB

Субтитры eng/ Section 3- Assembler Rules and Directives, Lecture 14- Predefined Register Names.vtt

2.58 KB

Субтитры eng/ Section 3- Assembler Rules and Directives, Lecture 15- Frequently used Directives.vtt

4.27 KB

Субтитры eng/ Section 3- Assembler Rules and Directives, Lecture 16- Overview of Binary Operators.vtt

2.11 KB

Субтитры eng/ Section 3- Assembler Rules and Directives, Lecture 17- Programming - Renaming Registers.vtt

4.59 KB

Субтитры eng/ Section 3- Assembler Rules and Directives, Lecture 18- Programming - Allocating space in memory with the SPACE Directive.vtt

7.82 KB

Субтитры eng/ Section 3- Assembler Rules and Directives, Lecture 19- Programming - Swapping Register Content.vtt

3.21 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 21- Memory Demarcations.vtt

4.26 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 22- Frequently used Load_Store Instructions (Part I).vtt

6.53 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 23- Frequently used Load_Store Instructions (Part II).vtt

5.35 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 25- Frequently used Load_Store Instructions (Part III).vtt

4.8 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 26- Pre-Indexed Addressing.vtt

2.47 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 27- Post-Indexed Addressing.vtt

2.79 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 28- Endianness.vtt

3.42 KB

Субтитры eng/ Section 4- Load-Store Instructions, Lecture 29- Defining Memory Areas.vtt

3.12 KB

Субтитры eng/ Section 5- Dealing with Constants and Literals, Lecture 30- The Encoding of the MOV Instruction.vtt

5.46 KB

Субтитры eng/ Section 5- Dealing with Constants and Literals, Lecture 31- Loading Constants with the LDR Instruction.vtt

3.13 KB

Субтитры eng/ Section 5- Dealing with Constants and Literals, Lecture 32- Loading Constants with the MOVW and MOVT Instructions.vtt

987 B

Субтитры eng/ Section 5- Dealing with Constants and Literals, Lecture 33- Loading Labels with ADR, ADRL and LDR Instructions.vtt

3.04 KB

Субтитры eng/ Section 5- Dealing with Constants and Literals, Lecture 34- Programming - Solving a Simple Equation.vtt

4.46 KB

Субтитры eng/ Section 5- Dealing with Constants and Literals, Lecture 35- Programming - Importing from C to Assembly.vtt

5.24 KB

Субтитры eng/ Section 5- Dealing with Constants and Literals, Lecture 36- Programming - Exporting from Assembly to C.vtt

5.89 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 37- Flags.vtt

3.56 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 38- The N and V Flags.vtt

3.81 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 39- The Z and C Flags.vtt

819 B

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 40- Compare_Test Instructions.vtt

7.2 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 41- Overview of Boolean Operations.vtt

1.9 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 42- Introduction to Shifts and Rotations.vtt

1.57 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 43- Understanding Logical Shifts.vtt

6.32 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 44- Understanding Rotations.vtt

2.13 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 45- Some Shift and Rotate Examples.vtt

3.27 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 46- Overview Addition and Subtraction Instructions.vtt

2.25 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 47- Overview of Multiplication Instructions.vtt

4.73 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 48- Multiplying by Constants.vtt

2.98 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 49- Overview of the Division Instruction.vtt

1.6 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 50- Bit Manipulation Instructions.vtt

5.26 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 51- Programming - Finding the Maximum Value in an Array.vtt

10.72 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 52- Programming - Experimenting with the LSL Instruction.vtt

4.16 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 53- Programming - Adding Signed Numbers.vtt

6.17 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 54- Programming - Finding the Minimum Value in an Array.vtt

7.35 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 55- Programming - Solving a More Complex Equation.vtt

6.27 KB

Субтитры eng/ Section 6- Arithmetic and Logic Instructions, Lecture 56- Programming - Performing Division by Subtraction.vtt

5.79 KB

Субтитры eng/ Section 7- Branch and Loop Instructions, Lecture 57- Introduction to Branches and Loops.vtt

1.57 KB

Субтитры eng/ Section 7- Branch and Loop Instructions, Lecture 58- Branching.vtt

13.13 KB

Субтитры eng/ Section 7- Branch and Loop Instructions, Lecture 59- Compare and Branch.vtt

1.41 KB

Субтитры eng/ Section 7- Branch and Loop Instructions, Lecture 60- Loops in Assembly.vtt

4.75 KB

Субтитры eng/ Section 7- Branch and Loop Instructions, Lecture 61- Conditional Execution.vtt

4.66 KB

Субтитры eng/ Section 7- Branch and Loop Instructions, Lecture 62- The IF-THEN Block.vtt

5.46 KB

Субтитры eng/ Section 7- Branch and Loop Instructions, Lecture 63- Programming - Computing the Factorial of a Number using the IF-THEN Block.vtt

4.67 KB

Субтитры eng/ Section 8- Stack Instructions, Lecture 64- Introduction to the Stack.vtt

1.38 KB

Субтитры eng/ Section 8- Stack Instructions, Lecture 65- The LDM and STM Instructions.vtt

5.18 KB

Субтитры eng/ Section 8- Stack Instructions, Lecture 66- Syntax of the PUSH and POP Instructions.vtt

1.23 KB

Субтитры eng/ Section 8- Stack Instructions, Lecture 67- Programming - Pushing and Popping a Stack.vtt

3.59 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 68- Overview of ARM Cortex-M General Purpose Input_Output Module.vtt

7.98 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 69- Getting the right Documentation.vtt

3.39 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 70- Programming - Analyzing the Chip's Memory Map.vtt

15.31 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 71- Programming - Defining Addresses for Registers.vtt

18.14 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 72- Programming - Setting the Pin as an Output Pin.vtt

8.43 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 73- Programming - Toggling a Pin using the Output Data Register (ODR).vtt

8.18 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 74- Programming - Toggling a Pin using the Bit Set _Reset Register (BSRR).vtt

8.2 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 75- Programming - Defining Registers for Input Driver.vtt

7.56 KB

Субтитры eng/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 76- Programming - Implementing the Input Driver.vtt

19.16 KB

Субтитры eng/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 77- Introduction to Analog to Digital Conversion.vtt

9.67 KB

Субтитры eng/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 78- Understanding ADC Independents Modes.vtt

3.77 KB

Субтитры eng/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 79- Programming - Planning the Project.vtt

6.61 KB

Субтитры eng/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 80- Programming - Implementing the Initialization Function.vtt

28.12 KB

Субтитры eng/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 81- Programming- Implementing the ADC Read Function.vtt

9.89 KB

Субтитры eng/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 82- Programming - Testing the ADC Driver.vtt

18.88 KB

Субтитры eng/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 83- Overview of the UART Protocol.vtt

9.22 KB

Субтитры eng/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 84- Programming - Planning the Project.vtt

7.48 KB

Субтитры eng/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 85- Programming - Configuring the GPIO Pins for the UART.vtt

19.83 KB

Субтитры eng/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 86- Programming - Configuring the UART Parameters.vtt

7.62 KB

Субтитры eng/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 87- Programming - Sending Characters.vtt

16.06 KB

Субтитры eng/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 88- Programming - Retargeting Printf_2.vtt

7.35 KB

Субтитры eng/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 89- Programming - Developing the UART RX Driver.vtt

17.44 KB

Субтитры eng/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 90- Overview of the System Tick Timer.vtt

8.78 KB

Субтитры eng/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 91- Programming - Implementing the Initialization Function.vtt

14.67 KB

Субтитры eng/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 92- Programming - Implementing the Delay Function.vtt

14.85 KB

Субтитры eng/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 93- Programming - Implementing Milliseconds Delay.vtt

7.09 KB

Субтитры eng/ Section 13- Developing the General Purpose Timer Driver, Lecture 94- Overview of General Purpose Timers.vtt

10.58 KB

Субтитры eng/ Section 13- Developing the General Purpose Timer Driver, Lecture 95- Programming - Planning the Project.vtt

7.81 KB

Субтитры eng/ Section 13- Developing the General Purpose Timer Driver, Lecture 96- Programming - Implementing the Initialization Function.vtt

10.64 KB

Субтитры eng/ Section 13- Developing the General Purpose Timer Driver, Lecture 97- Programming - Testing the Driver.vtt

13.5 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 98- Introduction to FIFOs.vtt

3.12 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 100- [OPTIONAL] Implementing the FIFO in C (Part I).vtt

13.28 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 101- [OPTIONAL] Implementing the FIFO in C (Part II).vtt

13.72 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 102- Programming - Implementing the Initialization Function.vtt

7.54 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 103- Programming - Implementing the FIO Put Function.vtt

11.7 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 104- Programming - Implementing the FIO Get Function.vtt

8.3 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 105- Programming - Implementing the FIO Size Function.vtt

3.67 KB

Субтитры eng/ Section 14- Working with Data Structures, Lecture 106- Programming - Testing the FIFO.vtt

13.18 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 107- Introduction to Moore and Mealy FSM.vtt

8.7 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 108- Designing Traffic Light System using Moore FSM.vtt

25.05 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 110- [OPTIONAL] Implementing a Traffic Light System using Moore FSM (Part I).vtt

48.77 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 111- [OPTIONAL] Implementing a Traffic Light System using Moore FSM in C (Part II).vtt

11.83 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 112- [OPTIONAL] Implementing Moore FSM using Pointers.vtt

8.67 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 113- Programming - Configuring the Required Pins.vtt

12.21 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 114- Programming - Implementing the State Machine.vtt

32.92 KB

Субтитры eng/ Section 15- Working with State Machines, Lecture 115- Programming - Testing the State Machine.vtt

7.46 KB

Субтитры ru/ Section 1- Getting Started, Lecture 1- Downloading our Integrated Development Environment (IDE).vtt

2.63 KB

Субтитры ru/ Section 1- Getting Started, Lecture 2- Installing our Integrated Development Environment (IDE).vtt

2.55 KB

Субтитры ru/ Section 1- Getting Started, Lecture 3- Programming - Writing a simple assembly program.vtt

24.04 KB

Субтитры ru/ Section 1- Getting Started, Lecture 4- Programming - Writing a simple assembly program without a startup file.vtt

10.31 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 5- The Computing Device.vtt

2.74 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 6- Number Systems.vtt

8.17 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 7- Translating Bits to Commands.vtt

3.81 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 8- The RISC Design Philosophy.vtt

4.63 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 9- The ARM Design Philosophy.vtt

3.67 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 10- Von Nuemann and Harvard architecture.vtt

4.42 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 11- ARM Cortex-M Registers.vtt

5.23 KB

Субтитры ru/ Section 2- Introduction to Arm Architecture, Lecture 12- ARM Cortex-M Vector Table.vtt

1.52 KB

Субтитры ru/ Section 3- Assembler Rules and Directives, Lecture 13- The ARM,Thumb and Thumb-2 Instruction Sets.vtt

2.98 KB

Субтитры ru/ Section 3- Assembler Rules and Directives, Lecture 14- Predefined Register Names.vtt

2.69 KB

Субтитры ru/ Section 3- Assembler Rules and Directives, Lecture 15- Frequently used Directives.vtt

4.62 KB

Субтитры ru/ Section 3- Assembler Rules and Directives, Lecture 16- Overview of Binary Operators.vtt

2.26 KB

Субтитры ru/ Section 3- Assembler Rules and Directives, Lecture 17- Programming - Renaming Registers.vtt

5.14 KB

Субтитры ru/ Section 3- Assembler Rules and Directives, Lecture 18- Programming - Allocating space in memory with the SPACE Directive.vtt

8.39 KB

Субтитры ru/ Section 3- Assembler Rules and Directives, Lecture 19- Programming - Swapping Register Content.vtt

3.48 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 21- Memory Demarcations.vtt

4.56 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 22- Frequently used Load_Store Instructions (Part I).vtt

6.89 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 23- Frequently used Load_Store Instructions (Part II).vtt

5.61 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 25- Frequently used Load_Store Instructions (Part III).vtt

4.99 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 26- Pre-Indexed Addressing.vtt

2.63 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 27- Post-Indexed Addressing.vtt

2.98 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 28- Endianness.vtt

3.65 KB

Субтитры ru/ Section 4- Load-Store Instructions, Lecture 29- Defining Memory Areas.vtt

3.38 KB

Субтитры ru/ Section 5- Dealing with Constants and Literals, Lecture 30- The Encoding of the MOV Instruction.vtt

5.74 KB

Субтитры ru/ Section 5- Dealing with Constants and Literals, Lecture 31- Loading Constants with the LDR Instruction.vtt

3.25 KB

Субтитры ru/ Section 5- Dealing with Constants and Literals, Lecture 32- Loading Constants with the MOVW and MOVT Instructions.vtt

1.12 KB

Субтитры ru/ Section 5- Dealing with Constants and Literals, Lecture 33- Loading Labels with ADR, ADRL and LDR Instructions.vtt

3.36 KB

Субтитры ru/ Section 5- Dealing with Constants and Literals, Lecture 34- Programming - Solving a Simple Equation.vtt

4.77 KB

Субтитры ru/ Section 5- Dealing with Constants and Literals, Lecture 35- Programming - Importing from C to Assembly.vtt

5.66 KB

Субтитры ru/ Section 5- Dealing with Constants and Literals, Lecture 36- Programming - Exporting from Assembly to C.vtt

6.26 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 37- Flags.vtt

3.69 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 38- The N and V Flags.vtt

4.11 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 39- The Z and C Flags.vtt

888 B

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 40- Compare_Test Instructions.vtt

7.66 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 41- Overview of Boolean Operations.vtt

2.02 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 42- Introduction to Shifts and Rotations.vtt

1.73 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 43- Understanding Logical Shifts.vtt

6.74 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 44- Understanding Rotations.vtt

2.23 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 45- Some Shift and Rotate Examples.vtt

3.55 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 46- Overview Addition and Subtraction Instructions.vtt

2.36 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 47- Overview of Multiplication Instructions.vtt

4.99 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 48- Multiplying by Constants.vtt

3.08 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 49- Overview of the Division Instruction.vtt

1.82 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 50- Bit Manipulation Instructions.vtt

5.47 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 51- Programming - Finding the Maximum Value in an Array.vtt

11.6 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 52- Programming - Experimenting with the LSL Instruction.vtt

4.51 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 53- Programming - Adding Signed Numbers.vtt

6.68 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 54- Programming - Finding the Minimum Value in an Array.vtt

8.09 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 55- Programming - Solving a More Complex Equation.vtt

6.86 KB

Субтитры ru/ Section 6- Arithmetic and Logic Instructions, Lecture 56- Programming - Performing Division by Subtraction.vtt

6.14 KB

Субтитры ru/ Section 7- Branch and Loop Instructions, Lecture 57- Introduction to Branches and Loops.vtt

1.73 KB

Субтитры ru/ Section 7- Branch and Loop Instructions, Lecture 58- Branching.vtt

13.83 KB

Субтитры ru/ Section 7- Branch and Loop Instructions, Lecture 59- Compare and Branch.vtt

1.54 KB

Субтитры ru/ Section 7- Branch and Loop Instructions, Lecture 60- Loops in Assembly.vtt

4.94 KB

Субтитры ru/ Section 7- Branch and Loop Instructions, Lecture 61- Conditional Execution.vtt

4.89 KB

Субтитры ru/ Section 7- Branch and Loop Instructions, Lecture 62- The IF-THEN Block.vtt

5.74 KB

Субтитры ru/ Section 7- Branch and Loop Instructions, Lecture 63- Programming - Computing the Factorial of a Number using the IF-THEN Block.vtt

4.76 KB

Субтитры ru/ Section 8- Stack Instructions, Lecture 64- Introduction to the Stack.vtt

1.52 KB

Субтитры ru/ Section 8- Stack Instructions, Lecture 65- The LDM and STM Instructions.vtt

5.34 KB

Субтитры ru/ Section 8- Stack Instructions, Lecture 66- Syntax of the PUSH and POP Instructions.vtt

1.38 KB

Субтитры ru/ Section 8- Stack Instructions, Lecture 67- Programming - Pushing and Popping a Stack.vtt

3.77 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 68- Overview of ARM Cortex-M General Purpose Input_Output Module.vtt

8.66 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 69- Getting the right Documentation.vtt

3.58 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 70- Programming - Analyzing the Chip's Memory Map.vtt

16.1 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 71- Programming - Defining Addresses for Registers.vtt

19.69 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 72- Programming - Setting the Pin as an Output Pin.vtt

9.14 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 73- Programming - Toggling a Pin using the Output Data Register (ODR).vtt

8.74 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 74- Programming - Toggling a Pin using the Bit Set _Reset Register (BSRR).vtt

9 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 75- Programming - Defining Registers for Input Driver.vtt

8.11 KB

Субтитры ru/ Section 9- Developing the General Purpose Input_Output(GPIO) Driver, Lecture 76- Programming - Implementing the Input Driver.vtt

20.73 KB

Субтитры ru/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 77- Introduction to Analog to Digital Conversion.vtt

10.42 KB

Субтитры ru/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 78- Understanding ADC Independents Modes.vtt

6.62 KB

Субтитры ru/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 79- Programming - Planning the Project.vtt

6.96 KB

Субтитры ru/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 80- Programming - Implementing the Initialization Function.vtt

30.07 KB

Субтитры ru/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 81- Programming- Implementing the ADC Read Function.vtt

10.52 KB

Субтитры ru/ Section 10- Developing the Analog to Digital Conversion (ADC) Driver, Lecture 82- Programming - Testing the ADC Driver.vtt

20.14 KB

Субтитры ru/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 83- Overview of the UART Protocol.vtt

9.7 KB

Субтитры ru/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 84- Programming - Planning the Project.vtt

7.67 KB

Субтитры ru/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 85- Programming - Configuring the GPIO Pins for the UART.vtt

21.13 KB

Субтитры ru/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 86- Programming - Configuring the UART Parameters.vtt

8.28 KB

Субтитры ru/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 87- Programming - Sending Characters.vtt

17.11 KB

Субтитры ru/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 88- Programming - Retargeting Printf_2.vtt

7.9 KB

Субтитры ru/ Section 11- Developing Universal Asynchronous Receiver-Transmitter(UART) Driver, Lecture 89- Programming - Developing the UART RX Driver.vtt

18.95 KB

Субтитры ru/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 90- Overview of the System Tick Timer.vtt

9.56 KB

Субтитры ru/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 91- Programming - Implementing the Initialization Function.vtt

15.68 KB

Субтитры ru/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 92- Programming - Implementing the Delay Function.vtt

16 KB

Субтитры ru/ Section 12- Developing the System Tick (SysTick) Timer Driver, Lecture 93- Programming - Implementing Milliseconds Delay.vtt

7.47 KB

Субтитры ru/ Section 13- Developing the General Purpose Timer Driver, Lecture 94- Overview of General Purpose Timers.vtt

11.88 KB

Субтитры ru/ Section 13- Developing the General Purpose Timer Driver, Lecture 95- Programming - Planning the Project.vtt

8.55 KB

Субтитры ru/ Section 13- Developing the General Purpose Timer Driver, Lecture 96- Programming - Implementing the Initialization Function.vtt

11.38 KB

Субтитры ru/ Section 13- Developing the General Purpose Timer Driver, Lecture 97- Programming - Testing the Driver.vtt

14.43 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 98- Introduction to FIFOs.vtt

3.35 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 100- [OPTIONAL] Implementing the FIFO in C (Part I).vtt

13.88 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 101- [OPTIONAL] Implementing the FIFO in C (Part II).vtt

14.64 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 102- Programming - Implementing the Initialization Function.vtt

7.83 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 103- Programming - Implementing the FIO Put Function.vtt

12.04 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 104- Programming - Implementing the FIO Get Function.vtt

8.49 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 105- Programming - Implementing the FIO Size Function.vtt

3.89 KB

Субтитры ru/ Section 14- Working with Data Structures, Lecture 106- Programming - Testing the FIFO.vtt

13.96 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 107- Introduction to Moore and Mealy FSM.vtt

9.25 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 108- Designing Traffic Light System using Moore FSM.vtt

27.35 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 110- [OPTIONAL] Implementing a Traffic Light System using Moore FSM (Part I).vtt

52.75 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 111- [OPTIONAL] Implementing a Traffic Light System using Moore FSM in C (Part II).vtt

13.1 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 112- [OPTIONAL] Implementing Moore FSM using Pointers.vtt

9.39 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 113- Programming - Configuring the Required Pins.vtt

12.89 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 114- Programming - Implementing the State Machine.vtt

35.79 KB

Субтитры ru/ Section 15- Working with State Machines, Lecture 115- Programming - Testing the State Machine.vtt

8.43 KB

资源详情

免责声明